Guides
Practical knowledge about protecting and cleaning surfaces. How to choose the right product, prepare the surface and apply it so it really works. Clear and step by step.
How to Seal Pavers Step by Step
Well sealed pavers look new for longer, absorb less water and are easier to keep clean. In this guide we go through the whole process, from identifying the paver type and cleaning to applying the product and long term care. We write concretely, because it is the details that decide whether the effect lasts for years.
How to Clean a Facade: Moss, Algae and Dirt
A dirty facade is not only a matter of looks. Moss and algae hold moisture against the wall and accelerate the decay of the render. We show how to safely remove green deposits and streaks and then protect the facade so it stays clean for longer.
How to Impregnate Wood: Choosing and Applying the Right Product
Wood only ages beautifully when it is protected. We show how to choose an impregnation for the specific use and apply it so it actually works, rather than just changing the colour for a few weeks.
How to Clean Pavers: Moss, Algae and Stains
Clean pavers are not only nicer to look at. Removing moss, algae and ingrained dirt slows the wear of the surface and is the condition for effective sealing. In this guide we show how to recognise the type of dirt, choose the right product and clean the pavers step by step, including difficult stains.
Wet Look on Pavers: How to Achieve It and Is It Worth It
The wet look deepens the colour of the surface and makes it look slightly wetted by rain. Some like it, some less so, so a deliberate decision is worth it. We explain where the effect comes from, how to achieve it and what to keep in mind before you apply the product to the whole driveway or terrace.
How to Clean a Roof: Moss, Algae and Lichen
Moss and lichen on the roof are not only a matter of looks. They hold moisture, grow into the covering and can clog the gutters. In this guide we show how to clean a roof safely, choose the product for the type of covering and what to keep in mind above all when working at height.
How to Clean and Protect a Terrace
A terrace lives outdoors all year round, and neglect shows on it fastest. Green deposits, grey wood and streaks appear sooner than you expect. We show how to clean and protect a terrace, depending on whether it is wood or slabs and pavers.
Pavers in Winter: Gritting and Clearing Without Damage
Winter is the hardest season for pavers. Water, frost and the wrong way of clearing snow often do more damage than a whole year of use. We show how to get through winter without damage and why it is worth preparing the pavers before the first frosts.
How to Prepare the Surface Before Impregnation
The success of impregnation depends to a large extent on what you do before applying the product. A poorly prepared surface will ruin even the best product. In this guide we gather the universal rules of surface preparation that apply equally to pavers, facade, wood and stone.
The Most Common Impregnation Mistakes and How to Avoid Them
Most failed impregnations are not down to the wrong product but to a few recurring mistakes. The good news is that all of them are easy to avoid. We have gathered them in one place, so you can check your list before you reach for the brush.
How to Impregnate a Facade and Protect It From Moisture
Impregnating the facade limits the wall absorbing water, slows the growth of algae and makes care easier. A well chosen product does all this without taking away the render ability to breathe. We show how to protect the facade so it stays dry and clean for longer.
How to Protect a Roof With a Water Repellent Product
After thorough cleaning, part of the roofs can additionally be protected with a product that limits water absorption and slows the return of growth. We explain when it makes sense, how to prepare the covering and what to keep in mind when working at height.
How to Impregnate Natural Stone Step by Step
Natural stone is beautiful, but sometimes temperamental. Different stone types absorb differently and react differently to products, so when protecting natural stone, care and a test matter more than anywhere else. We show how to approach it with sense.
How to Protect Clinker and Brick From Moisture
Clinker and brick are durable and striking, but their weakest point is often the joints and efflorescence. Impregnation limits water absorption, slows soiling and helps through winter. We show how to protect such a surface so it pleases the eye for a long time.
How to Calculate Impregnation Usage and How Much to Buy
Too little product interrupts the work halfway, too much is needless cost. A well calculated usage lets you buy exactly what you need, with a sensible reserve. We show step by step how to do it for different surfaces.
How to Protect and Clean Porcelain Stoneware
Porcelain stoneware is hard, durable and usually low absorbing, so some think it needs no protection at all. In practice the most happens in the grout, and the look and stain resistance also depend on the type of stoneware. We explain when protection is worth it and how to care for it.
Impregnation or Coating: Which to Choose
This is one of the most common questions when protecting surfaces. Impregnation and coating protect differently and give a different look, so the right choice starts with understanding the difference. We break down both options so you decide with your eyes open.
Pressure Washing Without Damaging the Surface
A pressure washer can save a lot of work, but used without feel it just as quickly ruins the surface. Washed out joints, damaged render or raised wood fibres are a common result of too strong a jet. We show how to clean effectively and safely.